SURFACE 604 BOAR HUNTER The Boar Hunter comes equipped with a fat bike specific 500W (peaks at 750W) motor that is extremely powerful. With a torque sensor and throttle on demand, the Boar Hunter is well suited to carry heavy loads and is often referred to as the pickup truck of bikes.
The Boar Hunter is designed with the avid outdoorsman in mind and thus knew that partnering with Kryptek, and industry leader in high-performance technical outdoor adventure apparel design, was a great fit! As such, the Boar Hunter features the Kryptek Highland Camo that is specially designed for geographical regions and elevations that are varied and increases stealth in mixed terrain.

MOTOR- High torque 500W Fat Bike Specific Bafang geared hub motor DRIVE MODE- Torque sensing pedal assist with a throttle TORQUE- 80Nm THROTTLE- Thumb push activated throttle CONTROLLER- 12 Mos 48V 500W 25A TOP SPEED- 20mph (32km/h) BATTERY- Included: 48V 14Ah / 499Wh Samsung lithium-ion 18650 cells Upgrade option: 48V 20Ah / 672Wh Samsung lithium-ion 18650 cells BATTERY RANGE- Up to 35mi (56km) with a 48V14Ah battery Up to 45mi (70km) with a 48V20Ah battery BATTERY CHARGE TIME- 3-6 hours for a full charge from empty DISPLAY TYPE- Surface 604 Color LCD display with micro USB jack FORK- Proprietary design, tapered steerer, Custom 6061 Aluminum fork DERAILLEUR- SRAM X5 9-speed CASSETTE- SRAM 9 speed, 12-34T SHIFT LEVERS- SRAM X5 trigger shift BRAKES- Tektro Auriga hydraulic disc, post mount, 180mm rotor CRANK SET- Samox 36T front sprocket, 170mm crank arms BOTTOM BRACKET- Samox Sealed Bottom Bracket FRAME TYPE- Tapered headtube, custom reinforced battery mounts, internal cable routing, post mount brakes FRAME MATERIAL- 6061 aluminum alloy STEM- UNO ONIT 35 degrees 90mm S/M 110mm M/L HEAD SET- Samox tapered with sealed bearings 1 1/8″- 1 1/2″ HANDLEBAR- Promax aluminum, 670mm wide, 6° sweep, 35mm rise, 31.8mm clamp diameter GRIPS- Full length 122mm, black colour PEDALS- Wellgo platform with die casting body CHAIN- KMC 9-speed SEAT POST DIAMETER- 30.4mm TIRES- 26″ x 4.5″ Kenda Juggernaut Sport RIMS- 26″ x 100mm single wall aluminum with cutouts FRONT HUBS- 150mm x 15mm thru-axle sealed bearing KICKSTAND- Heavy duty aluminum STANDOVER HEIGHT- Small-Medium: 28.5” (724mm) Medium-Large: 30” (762mm) RECOMMENDED RIDER HEIGHT- Frame Sizes: S/M - 17.5", M/L - 19.5" For Riders: S/M 5’2”-5’7”, M/L 5’8” - 8’8” NET WEIGHT (INCLUDING BATTERY)- 58lbs WEIGHT CAPACITY- 285lbs BUILT-IN FEATURES- Racks (front and rear) OPTIONAL UPGRADE FEATURES- SR Suntour NCX suspension seat post, fenders (front and rear)
|